Mounting And Unmounting Xl Lenses - Canon XL 1s Instruction Manual

Mounting and Unmounting XL Lenses

Any lens bearing the
E
• If you are a Body Kit user, please refer to the appropriate lens instruction manual. Note that the lens
functions vary by the lens type.
Mounting the lens
1. Remove the dust cap from the lens and the body cap from the camcorder.
2. Align the red dot on the camera body with the mount positioning point (the red dot) on the
lens, then turn the lens clockwise until it clicks and locks into place.
Unmounting the lens
1. Slide and hold the LENS RELEASE switch and turn the lens counter-clockwise until it
stops. Then, remove the lens from the camera body.
2. When you are not using the lens or camera, be sure to replace the dust cap and body cap.
14
mark can be used with this camcorder.
LENS RELEASE