Recording From Analog Video Devices (Vcr, Tv Or Camcorder) - Canon MVX10 Instruction Manual

Recording from Analog Video
Devices (VCR, TV or Camcorder)
E
You can record videos or TV programs from a VCR or analog camcorder on the tape in
the camcorder.
❍ Anomalous signals sent from the connected device may be recorded as
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
❍ You cannot record from tapes with copyright protective signals.
❍ Headphones cannot be used during analog line-in recording. If the
AV/headphones terminal set to [PHONES H], it will automatically switch to [AV].
❍ When connecting to a TV/video with SCART terminal, use a SCART adapter
with input capability (commercially available). The supplied SCART Adapter
PC-A10 is for output only.
CAMERA
1. Connect the camcorder to the analog video device.
See Playing Back on a TV Screen (
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected device: Play back the tape.
e/a button when the scene you wish to
6. Press the
record appears.
7. Press the 3 button to stop recording.
• Press the e/ a button to pause recording.
• Press the e/ a button again to restart recording.
8. Connected device: Stop playback.
88
PLAY (VCR)
37).
CARD CAMERA CARD CAMERA