Brother P-touch 2600, 2610 User Manual page 31

4 Double-click the Mac OS 9 folder to open
it.
5 Double-click the P-touch Quick Editor
Installer icon in the folder that appears.
The installer starts up.
6 Select the installation method.
•For a basic installation
Clicking the Install button immediately starts installing the most basic options.

About 20 MB of available hard-disk space is needed to begin installation. If enough
hard-disk space is available, click the Install button.
•For a custom installation
Clicking the Custom Install button dis-
plays a dialog box that allows you to
select which options to install.
Only the options with a check mark
beside them are installed. Select the
options that you wish to install, and then
click the Install button.

In order to print from the P-touch
2600/2610, "PT-2600/2610 Driver"
must be selected for installation.
7 When the dialog box appears, indicating
that the installation is finished, click the
Quit button.
8 When the dialog box appears, asking if
you wish to restart the computer, click the
Restart button to restart the computer.
24