Brother P-Touch 2480 User Manual page 20

BL. LEN. (block length):
●
FRAME:
●
PRINT (print order):
●
☞ For these types of labels, we recommend using Strong Adhesive Tape.
☞ The PRINT parameter is only available with the PANEL Label Type mode.
☞ By using the Numbering function with the PANEL Label Type mode, a single label
containing multiple blocks of ascending characters can easily be created, for example,
to label patch panels as shown above. (For details on the Numbering function, refer to
Printing multiple copies with incremental characters
* For the PORT Label Type mode:
20 to 200 mm
Default: 30 mm
* For the PANEL Label Type mode:
6 to 200 mm
Default: 30 mm
* For the PORT Label Type mode:
OFF, 1 , 2
Default: OFF
* For the PANEL Label Type mode:
OFF, 1 , 2
4 , 5
7 , 8
Default: OFF
IN ORDER, REVERSE
Default: IN ORDER
, 3 , 4
, 3 ,
, 6 ,
, 9
on page 31.)
13