Table of Contents
Advertisement
Fingernails and the luminescent tube should be in the same side.
6.1.3 Pause Alarm
a.
Alarm includes the alarm of measure data's going beyond the
limits(SpO
and pulse rate value), alarm of low-power, and the alarm of
2
finger out.
b.
In the measuring interface, if the alarm function is on, during the
period of alarming, alarm can be suspended by short pressing menu
button,and the screen will appear pause-alarm symbol, but the function
will be renewed in about 30 seconds.
c.
If you want to turn off the alarm, you should enter the menu for
operation.Please refer to chapter "Alarm setting" for detail.
6.1.4 Change Display Direction
The device could change display direction by manual mode.In the
measuring interface,short press menu button to change display direction.
6.1.5 Menu Operations
In the measuring interface, long press menu button to enter the main menu
interface as Figure 4..The user can adjust the settings through the main
menu, such as backlight, alarm, data storage,system setting,pulse sound
setting,demo. The specific operation methods are as follows:
Figure 3
10
Advertisement
Table of Contents
