Brother MFC-J825DW Basic User's Manual page 58

Chapter 6
Changing the remote codes
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
a
Press Menu.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display Remote Codes.
g
Press Remote Codes.
h
Press On (or Off).
i
Do one of the following:
 If you want to change the Fax
Receive Code, enter the new code.
Press OK. Go to step j.
If you do not want to change the Fax

Receive Code, press OK. Go to
step j.
j
Do one of the following:
 If you want to change the Telephone
Answer Code, enter the new code.
Press OK. Go to step k.
 If you do not want to change the
Telephone Answer Code, press OK.
Go to step k.
k
Press Stop/Exit.
44
Note
6
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another three-
digit code (such as # # # and 9 9 9).
• Remote Codes might not work with some
telephone systems.