Side Opening; Vertical Floor Or Wall Installation - Carrier 42SIC Installation, Operation And Maintenance Instructions

2 - INSTALLATION

2.4 - Side opening

- On the left-hand side lift the cover that protects the screw, loosen the screw that fixes the left panel, then move it slightly to the
left and lift it up.
- On the opposite side, lift the cover that protects the screw and unscrew it.
- Move the side panel slightly to the right and lift it out.

2.5 - Vertical floor or wall installation

When mounting on the floor with support feet, refer to the individual instructions leaflets supplied and the relative manual for the
mounting of the feet.
Using the paper template, trace the position of the two fixing brackets on the wall. Use a suitable drill to make the holes with and insert
the toggle bolts (2 for each bracket); fix the two brackets. Do not over-tighten the screws so that the brackets can be adjusted with a
spirit level.
Fully tighten the four screws to block the two brackets.
Check the stability by manually moving the brackets to the right and to the left, up and down.
Mount the unit, checking that it fits correctly onto the brackets and checking that it is stable.
B toggle bolts
C brackets
6
B
C
D
B cover
C fixing screws
D left panel
E right panel
B C
B
C
E
B
C