Change Administrator's User Name And Password; Wan Side Administration - Cables to Go ZRC0104C User Manual

The Administrator Setting page provides the following configuration options:
a. Change Administrator's User Name and Password
b. WAN Side Administration

Change Administrator's User Name and Password.

You can specify a new user name and password for the administrator. After enter the new user name,
old password and new password twice, then click the "Apply" button to make the new user name
and password effective. And The "user name and password" screen will appear. Enter the new user
name and password to obtain authentication.

WAN Side Administration

You can configure the ZSR0104C SERIES to be managed from the WAN side, Internet, via
web browser with specified port number. Click the check mark of the "Allow
administration from WAN side with port" to enable the remote access the NAT router.
You can change the HTTP server default port number, 80, to any number in the range 1 to
65535 if it is desired or the port 80 of a virtual server is enabled. For example, the port
number 80 is specified in the following case.
Click the "Apply" button to make the remote access effective.
Page 19