FIBER O
S
NE
HOT
How to Clean Connectors
Fluke Networks recommends that you use a mechanical device
to clean connectors. If you do not have such a device, use other
optical-grade supplies to clean connectors.
How to Use a Mechanical Device
To prevent damage to the device and to connectors,
read all instructions and obey all safety precautions
given by the manufacturer of the device you use to
clean connectors.
Use a video microscope, such as the Fluke Networks FI-7000
1
FiberInspector
continue to step 2.
10
P
Users Manual
RO
Key
Slot
Figure 5. How to Remove and Install
the Connector Adapter
W
Pro, to inspect the connector. If it is dirty,
™
Keep extra adapters in
the containers provided.
Caution
gmh08.eps