Table of Contents
Advertisement
If you are using Windows NT
will appear on the screen:
You are running Windows NT
support this version of Windows NT
WINDOWS NT 4.0 AND REINSTALL MFL Pro!!
If you are using Windows NT
as the Administrator, an error message will appear explaining the problem.
A window appears listing the options:
For each application you install, click on that name in the Software
Installation window and follow the instructions on the screen. The last
step will be to restart Windows
window again to install the next application.
3
Click on "Install Multi-Function Link
prompts on the screen.
After you install the Multi-Function Link
PC, the MFC Remote Setup dialog box will be displayed on your PC
screen. MFC Remote Setup allows you to quickly set up your MFC by
taking advantage of the ease and speed of programming on your PC. When
you access this application, the settings on the MFC will be displayed on
your PC so you can change them as needed and then download them to the
MFC.
4
After you finish installing the software, you can click on "On-Line
Documentation" to access on-line documentation for
Multi-Function Link
®
3.51 or earlier, the following error message
®
3.51 or earlier. Brother MFL Pro does not
®
Workstation 4.0 and you are not logged-in
®
and access the Software Installation
®
Pro and ScanSoft
S E T U P B R O T H E R M A C H I N E W I T H P C
®
. YOU MUST UPGRADE TO
®
Pro Software" and follow the
®
Pro Software and restart your
™
®
PaperPort
.
12 - 13
Advertisement
Table of Contents
