Wireless Security Setup - CNET CWA-854 User Manual

below:
1. Operating band: 802.11B/G, 802.11G or 802.11B.
2. Operating mode: AP, Client, WDS, and AP+WDS.
3. Network type: when operating mode is "Client" mode, users can select the network type as
"infrastructure" or "Adhoc".
4. SSID: The SSID differentiates one WLAN from another, therefore, all wireless access
points/routers and all wireless devices attempting to connect to a specific WLAN must use the
same SSID. It is case-sensitive and must not exceed 32 characters.
5. Channel Number: The number of channels supported depends on the region of this
Wireless Access Point. All stations communicating with this Wireless Access Point must use
the same channel. (note: not supported in client mode)
6. Enable Mac clone: when operating mode is "Client" mode and only one Ethernet client
exists, users can enable this Mac clone feature to connect with the wireless station easily.
After all items are set, click "Next" button. You will enter the Wireless Security Setup page.

2.1.3 Wireless Security Setup

There are five encryption types: None, WEP, WPA(TKIP), WPA2(AES) and WPA2 Mixed.
Encryption: None
No encryption is selected.