Projector Parts - Rear - Epson EH-LS300W User Manual

Projector Parts and Functions
Name Function
Air exhaust vent Exhaust vent for air used to cool the projector
A
internally.
Obstacle sensors Detect obstacles that are interfering with the projection
B
area.
Status indicator Indicates the projector's status.
C
Motion sensor Detects movement near the projection window and
D
reduces the brightness of the light source for safety.
Projection window Images are projected from the lens inside the projector.
E
Caution
While projecting, do not put your face or
hands near the air exhaust vent, and do not
place objects that may become warped or
damaged by heat near the vent. Hot air from
the air exhaust vent could cause burns,
warping, or accidents to occur.
• The detection range may vary
depending on the temperature of
the surroundings.
a
• Movement may not be detected
through transparent material such
as glass.
Warning
• Do not look into the projection window
while projecting.
• Do not place any objects or put your hand
near the projection window. It could cause
burns, fire, or the object to warp because this
area reaches a high temperature due to the
concentrated projection light.
g g Related Links
• "Projector Indicator Status" p.64
• "Cleaning the Obstacle Sensor and Motion Sensor"

Projector Parts - Rear

Name Function
Power inlet Connects the power cord to the projector.
A
Air intake vent Takes in air to cool the projector internally.
B
Optical Out port Outputs audio to an external audio system by
C
connecting an optical digital audio cable.
Service port This port is not normally used.
D
HDMI1 port Inputs video signals from HDMI compatible video
E
equipment and computers. This projector is compatible
HDMI2 (ARC) port
with HDMI 2.3.
HDMI2 port is compatible with HDMI ARC.
9
p.57