Solving Image Problems; Solving Missing Image Problems; Adjusting An Image That Is Not Rectangular - Epson EH-LS300W User Manual

Solving Image Problems

Check the solutions in these sections if you have any problems with projected
images.
g g Related Links
• "Solving Missing Image Problems"
• "Adjusting an Image that is not Rectangular"
• "Adjusting a Fuzzy or Blurry Image"
• "Fixing Partial Image Problems"
• "Adjusting an Image that Contains Noise or Static"
• "Adjusting an Image with Incorrect Brightness or Colors"

Solving Missing Image Problems

If no image is displayed, try the following steps until the problem is solved.
a
Check the projector's status:
• Press the button on the control panel or remote control to
see if the image was temporarily turned off.
• Check the status indicator to confirm that the projector is in normal
operating status.
• Press the projector's power button to wake it from standby or sleep
mode.
Settings > Sleep Timer
s
b Check the cable connection:
• Make sure all necessary cables are securely connected and the power
is on for the projector.
• Connect the video source directly to the projector.
• Replace the HDMI cable with the shorter one.
c Check the status of your video source:
• Make sure the connected device meets the HDMI CEC standard. See
the documentation supplied with the device for more information.
p.67
p.67
p.68
p.68
p.68
p.69
• If you are projecting from a laptop computer, make sure it is set up
to display on an external monitor.
d Check the following items:
• You need an Internet connection to view online content. Make sure
your Wi-Fi is on.
• Set the CEC function for the connected device again and restart the
device.
• Make sure the computer's display resolution does not exceed the
projector's resolution and frequency limits. If necessary, select a
different display resolution for your computer. (See your computer
manual for details.)
• Resets all of the projector settings to their default values.
g g Related Links
• "Projector Feature Settings - Settings Menu"

Adjusting an Image that is not Rectangular

If the projected image is not evenly rectangular, try the following steps until
the problem is solved.
a Place the projector directly in front of the center of the screen, facing it
squarely, if possible.
b button on the remote control to perform Corner
Press the
Adjustment correction.
g g Related Links
• "Correcting the Image Shape with Corner Adjustment"
67
p.53
p.25