For Wired Network Interface Cable Users - Brother HL-53 Quick Setup Manual

Wired Network

For Wired Network Interface Cable Users

Connect the printer to
7
your Macintosh and
install the driver
a
Connect the network interface cable to the LAN
connector marked with a
connect it to a free port on your hub.
b
Make sure the printer power switch is on.
c
Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
d
Double-click the HL5300 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
20
e
symbol and then
f
Please see the User's Guide on the CD-ROM to
install the PS driver (Brother's BR-Script Driver).
g
Macintosh
Click Install Printer Driver on the menu
screen.
Click Network cable users and follow the
on-screen instructions. Then, restart your
Macintosh.
Note
The Brother software will search for the Brother
printer. During this time the following screen
will appear.