Table of Contents
Advertisement
3
Multitap standard text input
When you are in Multitap mode (sometimes
called multipress mode), you enter a letter by
pressing the number key on which the letter is
printed. Press the key repeatedly until the
required character is displayed. If you pass
the character you want, keep pressing the key
to scroll through all the characters again.
For example, to enter the letter "r" press 7
three times.
If a word you are entering contains two
consecutive letters which are located on the
same key, enter the first one and then wait for
the cursor to reappear before entering the
second.
Some punctuation marks (including full stops,
hyphens and apostrophes) are available on
1. Alternatively, press and hold # to pick
a symbol to insert from the character table
(see the Entering symbols section below).
When you have finished entering a word,
press 0 to enter a space and move on to
the next word.
If you make a mistake, press d,
delete a character.
For example, to enter the name "Ross" when
you are in lower case mode:
Press and hold * to change the text
1
mode to upper case mode (k).
Press 7 three times, to display "R", you
2
will then return to lower case mode.
Press 6 three times, to display "o".
3
Press 7 four times, to display "s". Now
4
pause slightly until the cursor reappears.
Then press 7 four times, to display "s".
5
Predictive text input
To save time when you are writing a text
message or MMS message, your phone has
a built-in dictionary feature which uses the
letters that you are typing to complete the
word.
This input method allows you to simply press
each key once. For example, to write the
name "Ross", press 7, then 6, then 7,
then 7 just once each.
The word may change as you type, but don't
worry about what is on the screen until you
have finished the word. Sometimes different
words share the same sequence of key
presses. If the finished word is wrong, press
the : and ; keys to scroll through other
possibilities.
If the word that you are looking for is still not
there, then press g,
possibilities have been viewed). Enter the
word in Multitap mode (press * to change
between b, k, and a) and press g,
OK once complete. The word is added to
your T9 dictionary, so the next time you enter
Clear
to
the word it will be displayed as one of the
possibilities.
>
Note:
available for some languages. In this
case, press and hold * to change the
text mode to b, k or a, and enter
the word again.
Some intelligent punctuation (including full
stops, hyphens and apostrophes) are also
available on 1. The punctuation mark is
completed when you enter the next keystroke.
After you have completed a word, press the
space key 0 to enter a space and move on
to the next word. Press and hold # to pick
a symbol to insert from the character table
(see the Entering symbols section below).
If you make a mistake at any time, press d,
Clear
[[[
]]]
12
γ
Spell
(displayed once all
The Spell feature may not be
to delete a character.
Advertisement
Table of Contents
