Booster To Harness Mode: Restoring The Harness And Buckle - Britax PIONEER User Manual

Switching Between Modes
Place the seat cover and foam
7
back in their original position
and attach the elastic bands.
Raise the head restraint to the
8
highest position.
Tuck each harness strap under
9
the side wing covers.
* Fold the harness straps to
remove any additional slack
before tucking underneath
the bib.
* Slide the comfort pads, chest
pads, chest clip and buckle
tongues to the top of the
harness strap before folding.
Tuck the harness straps
10
behind the head restraint bib.
30
TRUE SIDE IMPACT
PROTECTION

Booster to Harness Mode: Restoring the Harness and Buckle

Pull seat cover forward.
1
Unhook the elastic bands at
2
the back of the seat cover. Pull
the seat cover and foam insert
forward.
Pull the belly pad through the
3
slot in the seat cover.
* Choose the slot that is closest
to, but not under your child
Place the seat cover and foam
4
insert back to their original
position and attach the
retaining clips.
Remove the harness straps
5
from behind the side wing
covers.
Switching Between Modes
31