Stanley STXH2000 Original Instructions Manual page 5

USING AN EXTENSION CABLE
If it is necessary to use an extension cable, please used an
approved extension cable that fits the tool's power input
specifications. The minimum cross-sectional area of the
conducting wire is 1.5 sq. mm. Cables should be untangled
before reeling up.
.
Cable cross-sectional
area (mm )
2
0.75
1.00
1.50
2.50
4.00
7.5
Voltage Amperes
110-127 0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
220-240 0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
Cable rated
current (Ampere)
6
10
15
20
25
Cable length (m)
15 25 30 45
Cable rated current (Ampere)
6 6 6 6 6
6 6 6 6 15
6 6 10 15 20
10 10 15 20 20
15 15 20 25 25
20 20 25 - -
6 6 6 6 6
6 6 6 6 6
6 6 6 6 10
10 10 10 10 15
15 15 15 15 20
20 20 20 20 25
LABELS ON TOOL
The label on your tool may include the following symbols:
WARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear safety glasses or goggles.
Wear ear protection.
V Volts
A Amperes
Hz Hertz
W Watts
min minutes
Alternating
60
Current
Position of date code
The date code, which also includes the year of manufacture,
10
is printed into the housing.
15
Example:
20
25
PACKAGE CONTENTS
-
The package contains:
-
1 Heat gun
6
1 Instruction manual
6 • Check for damage to the tool, parts or accessories which
may have occurred during transport.
15
• Take the time to thoroughly read and understand this
15 manual prior to operation.
20
FEATURES (Fig A)
-
1. Switch
2. Heat control knob
3. Ventilation slots
4. Nozzle
ASSEMBLY
WARNING! Before assembly, make sure that the
tool is switched off and unplug.
Handling your heat gun
Do not place your hand over the ventilation slots (3) or block
these vents in any way. This restricts the airflow through the
element and causes over heating.
(Original instructions)
Direct Current
n No-Load Speed
0
Class II Construction
Earthing Terminal
Safety Alert Symbol
Revolutions or
/min. Reciprocation per
minute
2017 XX JN
Year of manufacturing
ENGLISH
5