Installing The Rear Wheel - Toro 136–5850 Installation Instructions Manual

Installing the Rear Wheel

1. Clean the pinion gear
Important: Inspect the pinion gear for wear;
replace it if necessary. A worn pinion gear will
cause premature wear on the wheel gear.
1. Pinion gear
(Figure 5).
Figure 5
2. Apply anti-seize to the wheel gear teeth
1. Wheel gear teeth
3. Use the bolt (5/16 x 3/4 inch) to secure the retainer to
the height-of-cut lever
4. Torque the bolt to 20 to 23 N∙m (15 to 16 ft-lb).
g189235
5. Install the wheel cover and wheel assembly
6. Use the previously removed nut to secure the wheel
to the axle bolt
3
(Figure
Figure 6
(Figure 4).
(Figure 2).
6).
g189234
(Figure 3).