Bushnell Voyager 78-9470 User Manual
  1. Manuals
  2. Brands
  3. Bushnell Manuals
  4. Telescope
  5. Voyager 78-9470
  6. User manual

Bushnell Voyager 78-9470 User Manual

Zoom refractor telescope
Hide thumbs
Table of Contents

Advertisement

Quick Links

470 x 60 Zoom Refractor Telescope
Model 78-9470

Advertisement

Table of Contents
loading

Related Manuals for Bushnell Voyager 78-9470

Summary of Contents for Bushnell Voyager 78-9470

  • Page 1 470 x 60 Zoom Refractor Telescope Model 78-9470...

  • Page 2: Telescope Assembly

    Turn power switch on. See finderscope page. Look through main telescope tube at low power and establish a well-defined stationary target. Looking through red dot finderscope, alternate tightening each adjustment wheel (at rear and left side of finderscope) until the red dot of finderscope is precisely aligned and centered on the same object being viewed in main telescope tube.
  • Page 3 Remove Lens Cover from Your Bushnell Voyager Telescope is now ready to be used. To obtain the fullest enjoyment from your telescope, please refer to the additional information below.
  • Page 4 1. Basic Description: In addition to our revolutionary Penta Mirror Technology, Bushnell is proud to present yet another pioneering feature with this telescope--Bushnell’s ZOOM Eyepiece Assembly. This assembly will provide the benefit of instantaneously zooming from 50 power to 150 power with a twist of the power change ring.
  • Page 5 Remove plastic insert on bottom side of finderscope to allow battery to make connection with battery contact for power. Turn power switch on. Look through main telescope tube at low power and establish a well-defined stationary target. Looking through red dot finderscope, alternate tightening each adjustment wheel (at rear and left side of finderscope) until the red dot of finderscope is precisely aligned and centered on the same object being viewed in main telescope tube.
  • Page 6 Saturn, Mars, Jupiter, and Venus are good second steps to take. 2. The first thing you need to do after assembling the telescope as planned is center the desired object in the finderscope's cross hairs. Provided you did a reasonable job aligning the finderscope, a quick look through the main telescope tube at low power should reveal the same image.
  • Page 7 Where do I start? Your Bushnell telescope can bring the wonders of the universe to your eye. While this manual is intended to assist you in the set-up and basic use of this instrument, it does not cover everything you might like to know about astronomy.
  • Page 8 5. What do the numbers on the eyepiece mean? If after you have set-up your new telescope you are unable to see any objects, use this Quick Reference guide to help you to understand the cause of the problem and quickly determine a remedy 1.
  • Page 9 Intended Configuration Diagram...

Table of Contents