TH-50PV700AZ / TH-50PV700H / TH-50PV700M / TH-50PV700MR
6.23. Remove the GS-Board
1. Remove the screws (×2
2. Disconnect the connector (GS52).
3. Remove the screw (
6.24. Remove the S-Board
1. Remove the screws (×2
frame.
2. Disconnect the connector (S1).
3. Remove the screws (×2
) and remove the GS-unit.
) and remove the GS-Board.
) and remove the S-Board metal
) and remove the S-Board.
6.25. Remove the K-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (DG1). (See section 6.8.)
3. Remove the screws (×2
4. Disconnect the connectors (K1) and remove the K-Board.
6.26. Remove the Plasma panel
section from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw (×1
each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×6
).
16
) and remove the K-Board.