11- Common Fault Phenomenon And Troubleshooting - Saturn LAWA-A Manual

EMBALLAGE SATURN PACKAGING / LAWA-A USER MANUAL

11- Common fault phenomenon and troubleshooting

Faults Analysis
1.The label can't
The product reach to
on the right the label position does
position not match the send
label time
2.label wrinkle Send label too fast
3.the used label Too loose between the
belt collect roll label roller and
collect label belt plate
not tight enough
Troubleshooting
①Adjust the conveyor speed, such as before the
product reach to the label position the label
have send out, can adjust the conveyor speed
slower.
②Adjust the sensor.Adjust the sensor holder on
the conveyor to the left, then press the start
bottom. If the send label speed still inaccuracy, can
use the above method adjust to the best
result/
slow the send label speed,turn the touch screen to
the send label speed adjustment part,slow the
send label speed.
①check the band carrier (green and round band
carrier). If find too loose, can loosen the fixed
collect label plate screw, tens the band carrier, if
the band carrier need to change a new one, pls use
the Fusion methods connect the Fusion
methods well.
17 | P a g e