Brother HL-2400C Series User Manual page 97

USER'S GUIDE
4–34
If CARD is selected,
Display Message
FORMAT CARD
exit
When the display shows "FORMAT CARD," press the Set button to
format the installed card.
After the printer finishes formatting the card, you must exit to the "CARD
OPERATION" menu.
Notes

When the card is formatted, data that has been previously written is
erased.

It takes ten or more seconds to format a 2-Mbyte flash memory card
or HDD card. The larger the capacity of the card, the longer time it
takes to format the card.
When the installed flash memory card or HDD card is formatted:
When you enter this mode menu with a formatted flash memory card or
HDD card installed, the display shows the following menus:
Display Message
CARD 1
CARD 2
After you have selected the card, the display shows the following
messages:
Display Message
EXECUTE DATA
CARD LIST
SAVE
DELETE
Card Operation
Format a new flash memory card or HDD
card.
Exit to CARD OPERATION
Card Operation
Select Card 1.
Select Card 2.
Flash Operation
Select the data ID and execute the selected
data. This menu appears only when data has
been saved on the card.
Print out the contents of the flash memory
card or the HDD card. This menu appears
only when anything has been saved in the
card.
Save received data, macros, and fonts.
Delete items from the card.