Brother HL-2400C Series User Manual page 74

Mode Menu (Continued)
CARD OPERATION CARD1(2)
(HP mode only)
ADVANCED MODE
PAGE COUNTER
exit MODE
Setting Menu Sub-Setting Menu
When the commercial flash memory card or the HDD card has been formatted:
EXECUTE DATA
DATA ID=#####
exit
CARD LIST
SAVE SAVE DATA
SET KEY--> END
DATA ID=#####
SAVE MACRO
MACRO ID=#####
PRIMARY FONT
FONT ID=#####
SECONDARY FONT
FONT ID=#####
DOWNLOAD FONT
FONT ID=#####
exit
DELETE MACRO ID=#####
DATA ID=####
FONT ID=#####
FORMAT CARD
SET –> DELETE ALL
exit
exit
NETWORK MODE LOCK PANEL=OFF
PASS NO=###
AUTO FF=OFF
WAIT TIME= 5s
FF SUPPRESS=OFF
exit
CONTINUE MODE CONTINUE=MANUAL
SCALABLE FONT FONT=ALL
INPUT BUFFER
SAVE SETTINGS SAVE SETTING 1
SAVE SETTING 2
exit
exit
COUNT= 0
CHAPTER 4 CONTROL PANEL
Setting
Execute the data on the card.
Execute the selected data.
Exit to EXECUTE DATA
Print the contents of the card.
Send data to be saved.
End saving the data.
Set data ID for saved data.
Save a macro.
Set macro ID for saved macro.
Save primary font.
Set primary font ID for saved font.
Save secondary font.
Set secondary font ID for saved
font.
Save download font.
Set download font ID for saved
font.
Exit to CARD 1 (2) OPERATION
Delete the selected macro.
Delete the selected data.
Delete the selected font.
Format the flash card.
Execute formatting the card.
Exit to FORMAT CARD
Exit to CARD 1(2) OPERATION
ON or OFF
Enter pass number.
ON or OFF
1 to 99 seconds for AUTO ON
ON or OFF
exit to NETWORK MODE
AUTO or MANUAL
ALL, LJ4
Increase or decrease the input
buffer capacity. (15 levels)
Save the current settings as #1
Save the current settings as #2
exit to SAVE SETTING
exit to ADVANCED MODE
Shows the number of printed
pages.
Exit MODE.
4–11