Troubleshooting, Care And Maintenance; General Instructions; Faults And Fault Diagnosis - Taurus Racing Bike Z9 Assembly And Operating Instructions Manual

5

TROUBLESHOOTING, CARE AND MAINTENANCE

5.1

General Instructions

⚠ WARNING
+ Do not make any improper changes to the equipment.
CAUTION
⚠
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2

Faults and Fault Diagnosis

The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault
Cracking in the pedal
area
Equipment wobbles
Handlebar/saddle
wobbles
Display is blank/is not
working
Felt brake makes
noises
Cause
Pedals loose
Equipment is not level
Loose screws
Batteries empty or loose
cable connection
Felt brake too dry
Solution
Tighten the pedals
Align the feet
Tighten screws firmly
Replace batteries or check cable
connections
Moisten felt brake with silicone spray
27