User-Defined Programme - Taurus Racing Bike Z9 Assembly And Operating Instructions Manual

Profiles of pre-set training programmes:
P 01 Peak
P 04 Hill
P 07 Canyon
P 10 Mountain
3.4.3

User-defined programme

When you have chosen the user-defined programme, you can set the resistance with the arrow but-
tons. Confirm your setting with MODE.
Then you set a time and hold MODE for two seconds to confirm.
Press START/STOP to start the training.
22
P 02 Longitudinal Valley
P 05 Hill cli
P 08 Hill valley
P 11 High land valley
P 03 Valley
P 06 High land
P 09 Hills
P 12 Hig land longitudinal valley
Figure 8
Z9