Access Point Mode - Buffalo AirStation Nfiniti WZR-AG300NH User Manual

with a router. It is not suitable for most home configurations. If you plan to use the
AirStation as an normal wireless router, make sure that this switch is in the normal
(ROUTER) position!
This AirStation supports quickly changing the
product from a wireless router to a conventional
access point.
Put your Airstation into Access Point Mode by
moving the switch on the bottom of your AirStation
from ROUTER to AP. This changes the default IP
address of the AirStation from 192.168.11.1 to
192.168.11.100, and DHCP, NAT, and the WAN port
are disabled.
Access Point Mode might be desirable if you're
adding wireless capability to an existing network
1

Access Point Mode