Table of Contents
Advertisement
Wireless Configuration
◗
■ NOTE: If configuring via a Wired Configuration, please skip to the next page!
Windows 2000/XP
If there is no Ethernet adapter available on the computer being used to configure
the AirStation, a wireless configuration may be performed using a correctly
installed 802.11b or 802.11g wireless adapter.
To configure the AirStation via a wireless connection, establish a connection to
the AirStation using the setup instructions that came with the wireless client card
or adapter that you are using.
Windows 98SE/ME
If there is no Ethernet adapter available on the computer being used to configure
the AirStation, a wireless configuration may be performed using a correctly
installed 802.11b or 802.11g wireless adapter.
To configure the AirStation via a wireless connection, establish a connection to
the AirStation using the setup instructions that came with the wireless client card
or adapter that you are using.
Identifying the Proper AirStation
The default SSID of the AirStation is its LAN MAC Address which was addressed
on Page 2 of this Quick Setup Guide. Using your wireless card's software or
Windows XP's Wireless Zero Config, connect to the Wireless Network that
broadcasts the LAN MAC Address of your AirStation as its SSID. Please consult
the documentation that came with your wireless client card or adapter for further
assistance.
5
Advertisement
Table of Contents
