Brother HL HL-4050CDN User Manual page 88

Paper Tray (continued)
Submenu
Priority
MP First
Duplex
(HL-4050CDN/
HL-4070CDW only)
MP Size
Tray1 Size
Tray2 Size
(HL-4050CDN/
HL-4070CDW only)
The default settings are shown in Bold with an asterisk.
General Setup
Submenu
Local Language
Ecology
Panel Control
The default settings are shown in Bold with an asterisk.
Options
<HL-4040CN only>
MP>T1*/T1>MP
<HL-4050CDN/HL-4070CDW
only>
(For no Tray2 installed)
MP>T1*/T1>MP
(For Tray2 installed)
MP>T1>T2*/MP>T2>T1>/T1>T2
>MP/T2>T1>MP/T1>T2/T2>T1
/T1>MP>T2/T2>MP>T1
Off*/On
Off*/On(Long Bind)/
On(Short Bind)
Any*/Letter/Legal/A4...
Any*/Letter/Legal/A4...
Any*/Letter/Legal/A4...
Menu Selections Options
English*/Français...
Sleep Time 0/1/2/3/4/5*.../ 240 Min
Toner Save On/Off*
Button Repeat 0.1*/0.4/0.6/0.8/1.0/1.4
/1.8/2.0 Sec
Message Scroll Level 1*/Level 2.../
Level 10
-nnonn+
LCD Contrast
Auto Online On*/Off
Descriptions
When Tray Use is chosen as Auto: Chooses the
order in which the printer uses the paper trays that
contain paper of the same size.
Chooses whether to feed paper from the MP tray as
a priority.
Chooses whether to automatically print on both
sides of the paper.
Choose the size of paper you put in the MP tray.
Choose the size of paper you loaded in the
standard paper tray.
Choose the size of paper you loaded in the optional
lower tray.
Descriptions
Changes the LCD language for your
country.
Sets the time to return to Power Save
mode.
Increases the page yield of the toner
cartridge.
Sets the time for the LCD message to
change when holding the + or -
button at intervals.
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
Adjusts the contrast of the LCD.
Return to Ready state automatically.
Control Panel
4
79