Monessen Hearth BUF32A Installation Manual page 22

1. Pull Lower Access Panel forward to disengage from
Firebox Bottom, set aside. See Figure 8.4.
Figure 8.4
2. Remove (2) screws securing the front edge of both the
right and left firebox supports. See Figure 8.5.
Figure 8.5
22
Monessen • BUF32/36/42 Installation Manual • 4139-901 • Rev A • 01/21
3. Rotate the right and left firebox support towards the
center until screw holes align and reinstall (2) screws
previously removed. See Figure 8.6.
Figure 8.6
Note: The front edge of the firebox supports may be ad-
justed in or out, if needed, to provide the best support for
the selected log set. Once the firebox supports are prop-
erly located, to provide maximum support, the front edge
MUST be secured with a minimum of (1) screw each. The
rear edge of the firebox supports should not be altered
from the factory setting.