Brother Innov-is 80 Operation Manual page 46

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
With a screwdriver, loosen the presser foot
d
holder screw, and then remove the walking
foot.
a Presser foot holder screw
Attach the presser foot holder.
e
• For details, refer to "Removing the presser
foot holder" (page 43).
Memo
Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to "Stitch Settings" (page 120).
The optional walking foot is available
through your Brother dealer.
a
Replacing the Presser Foot 45
1