Intended Use; Warranty - Festool UCR 1000 Assembly Instruction/Spare Parts List

GB
UCR 1000 / MFH 1000
1

Intended use

The Universalcenter (UCR 1000) and the
multifunction stool (MFH 1000) are designed
for use in enclosed, non-living areas.
Together with the Workcenter (WCR 1000),
the Universalcenter forms a mobile work-
shop trolley for placing, storing and trans-
porting tools and consumables.
The multifunction stool is used as a mobile
seat in combination with the seat cushion
(MFH-SK).
For reasons of safety, the arbitrary con-
version and/or modification of the
product is not permitted.
The user bears the responsibility for
damage and accidents caused by im-
proper use.
2 Symbols
Warning of general danger
Manual, read the instructions
Climbing prohibited
3 Safety instructions
Warning! Read and observe all in-
formation and safety instructions.
Ignoring warning notes and instruc-
tions may result in serious injuries.
Keep all safety information and other in-
structions in a safe place for future ref-
erence.
– The device is not intended for use by per-
sons (including children) with limited phys-
ical, sensory or mental ability or without
sufficient experience and/or knowledge,
unless they are supervised by a person re-
sponsible for their safety or have been in-
structed on how to use the device. Children
should always be supervised to ensure that
they do not play with the device.
– Do not use the trolley on sloping or
uneven surfaces, otherwise it may tip
over or roll away and cause personal injury
or damage to property.
– Always use the trolley on a clean,
smooth and stable surface. Sharp-
edged, pointed foreign objects and fibres
(e.g. from cleaning cloths) can damage the
rollers or cause them to seize up. Check
8
the rollers for jammed foreign objects be-
fore rolling the trolley or using it at another
location.
– Do not overload the base frame and
never use it as a ladder or trestle. Ob-
serve the permitted maximum weight
(Fig.: [2] + [3]). Overloading or standing
on the trolley can cause accidents. When
placing objects on the storage surfaces of
the trolley that do not distribute weight
evenly due to their profile, always use an
additional support such as a solid board or
panel made from appropriate material.
4 Assembly
Assembly
Main body
Mounted on MFH 1000
Mounted on UCR 1000
L To upgrade an existing Workcenter WCR
1000 with serial number smaller than
10102312 it is necessary to order the
base plate 35000318.
5 Disposal
Do not dispose of the device together
with domestic waste! Dispose of ma-
chines, accessories and packaging at an en-
vironmentally responsible recycling centre.
Observe the valid national regulations.
REACh for Festool products, its acces-
sories and consumable materials:
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream
users" and product manufacturers, we are
aware of our duty to provide our customers
with information. We have set up the follow-
ing website to keep you updated with all the
latest news and provide you with information
on all the materials used in our existing prod-
ucts:
6

Warranty

We offer a warranty for material and produc-
tion defects for all our tools in accordance
with the locally applicable legal provisions,
but for a minimum of 12 months. Within the
EU member states, the warranty period is 24
months (verification through invoice or deliv-
ery note). Damage caused by the operator,
natural wear, overloading, incorrect handling
or through the use of the equipment not
Diagram
[1]
[2]
[3]