Mode Timer; Paper Settings; Paper Size; Volume Settings - Brother FAX-1360 User Manual

Chapter 3

Mode Timer

The machine has mode keys on the control
panel: Fax and Copy. You can change the
amount of time the machine takes after the
last Copy operation before it returns to Fax
mode. If you choose Off, the machine stays
in the mode you used last.
a
Press Menu, 1, 1.
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.

Paper settings

Paper Size

You can use three sizes of paper for printing
faxes and copies: Letter, Legal and A4. When
you change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a
Press Menu, 1, 2.
b
Press a or b to choose Letter,
Legal or A4.
Press OK.
c
Press Stop/Exit.
12

Volume Settings

3

Ring Volume

You can choose a range of ring volume
levels, from High to Off.
While in Fax mode
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume from the
menu
a
Press Menu, 1, 3, 1.
b
Press a or b to choose Low, Med,
High or Off.
3
Press OK.
c
3
Press Stop/Exit.

Beeper Volume

When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu, 1, 3, 2.
b
Press a or b to choose Low, Med,
High or Off
Press OK.
c
Press Stop/Exit.
3
3
, press d or c
3
3