Braun 9 Series Instructions Manual page 11

5c Status segments
5d Minutes left display
5e Cleaning indicator*
5f Plug reminder
5g Battery icon*
6 Precision trimmer
7 Shaver-to-station contacts
8 Release button for precision trimmer
9 Shaver power socket
10 Power supply**
10a Charging stand*/**
11 Travel case
* not with all models (see display box)
** design can differ
Basic operating information
• A full charge takes 1 hour and provides up to 60 minutes of cordless shaving time.
This may vary depending on your beard growth and ambient temperature.
• Recommended ambient temperature for charging is 5 °C to 35 °C, for storage and
shaving it is 15 °C to 35 °C. The battery may not charge properly or at all under
extremely low or high temperatures.
• Do not expose the appliance to temperatures higher than 50 °C for extended
periods of time.
• When the shaver is connected to an electrical outlet, it may take some minutes
until the display illuminates.
Charging
• Connect the shaver to an electrical outlet by plugging the power supply (10) into the
power socket of the shaver (9) or the charging stand (10a) until it clicks into place.
• For first-time charge, charge continuously for at least 1 hour.
• The actual charge status is shown on the display.
Display
• The display information is dependent on the model.
• Some models only show icons during charging or operation. On other models
a series of icons is also shown after the shaver has been turned off.
• The table below shows the icons that can appear on the shaver display.
Battery status
12
The battery status is shown with segments and additionally in
digits (for some models also with a battery icon).
• The status segments appear / disappear gradually with the
status of the battery power.
• The digital number shows the remaining shaving time in
minutes.