Brother PT-9400 User Manual page 35

Ch. 3 Functions
Style ( )
Style
You can choose from 7 different text styles to
create more personalized labels. Refer to the
style samples on page 82. The style of the text at
the cursor's current position is shown by the
Style indicators at the bottom of the display.
NOTE
While selecting a Style setting, the following opera-
tions may be used:
To display the previous setting, hold down
and press Style .
To select the default setting (NORMAL), hold
Shift
down and press
To return all text formatting functions to their
default settings, hold down
(space bar).
To return to the text without making any
Cancel
changes, press .
Back-
Caps Alt Template Zoom ground
0.0"
MARGIN:WIDE
A
Style
To change the text style before entering the
text:
1 Press
, ,
is moved to the point where you want to
begin using a different text style.
2 Press
until the desired style is selected.
Style
The current setting is shown below STYLE at
the top of the display and a sample (A) can
be seen to the right of the cursor.
28
Code
.
Style
Code
and press
Half
Cutter
1
36mm 1/2"
HELSI
AUTO
1"
24mm
18mm 3/4"
12mm
1/2"
9mm 3/8"
6mm
1/4"
Italic Vertical
, or until the cursor
Caps Alt Template Zoom
STYLE
OUTLINE
A
Style
3 Type in the new text.
To change the style of the text in a selected
area:
Code
1 Hold down
and press
of the text, or press
, or to select only a part of it.
2 Press
until the text is displayed in the
Style
desired style. The setting is shown below
STYLE at the top of the display.
Caps Alt Template Zoom
STYLE
OUTLINE
A
Style
3 Press
. The selected text is displayed
New Block
in the desired text style.
Back- Half
ground Cutter
1
36mm 1/2"
24mm 1"
18mm 3/4"
12mm 1/2"
3/8"
9mm
6mm 1/4"
Italic Vertical
Area
to select all
All
Area
and use ,
All
Back- Half
ground Cutter
1
36mm 1/2"
24mm 1"
18mm 3/4"
12mm
1/2"
9mm 3/8"
6mm
1/4"
Italic Vertical
,