Table of Contents
Advertisement
PAN1326C2 Bluetooth Module
2. Extract the downloaded file CCS10.x.x.xxxxx_win64 and locate the file
ccs_setup_10.x.x.xxxxx.exe in the extracted folder.
3. Start and install the setup.
If you want to install specific devices to save disk space, choose Recommended
Installation, otherwise choose Full Installation.
4. Select the component SimpleLink MSP432 low power + performance MCUs (1) for
applications with PAN1326C2 and TI EVK (Texas Instruments evaluation kit).
5. Click Next > (2) and complete the setup by following the instructions. Leave the debug
probes selection as it is.
Now the "Code Composer Studio" is installed.
3.3 Starting "Code Composer Studio"
Before starting programming, always update "Code Composer Studio" and the
compilers to the newest version.
The following requirements must be met:
✓ The "CC2564CMSP432BTBLESW1" is installed
"CC2564CMSP432BTBLESW1".
✓ The "Code Composer Studio" is installed
Quick Start Guide Rev. 1.0
CCSTUDIO can be downloaded as "single file" or "on-demand". If you
do not want interference with your installed anti-virus program, then it
is recommended to use the single file installer.
3.2 Installing "Code Composer
3 Setting up the Toolchain
3.1 Installing
Studio".
Page 9 of 20
Advertisement
Table of Contents
