Setting Up The Demo; Loading The Demo - Panasonic PAN1326C2 Quick Start Manual


PAN1326C2 Bluetooth Module

4 Setting up the Demo

Two different demos can be set up:
•
•
This chapter explains how to set up the demos:
•
"iBeacon (Bluetooth Low Energy)" by using Panasonic development kit and receive
beacon data in app.
•
"SPP (Bluetooth Classic)" by using Panasonic development kit and transmit strings from
terminal to application via PAN1326C2.
To set up the demo, the following steps must be done:
 4.1 Loading the Demo
1.
 4.2 Connecting the Evaluation Board
2.
 4.3 Flashing the Code
3.
4. For the demo "iBeacon (Bluetooth Low Energy)" please refer to
"iBeacon (Bluetooth Low
for the demo "SPP (Bluetooth Classic)" please refer to
Classic)".

4.1 Loading the Demo

1. Go to C:\ti\Connectivity\CC256X BT\CC256x MSP432 Bluetopia
SDK\v4.2.1.1\Samples\XXXX and load the demo (iBeaconDemo or SPPDemo).
2. Click the tab Project > Properties.
Quick Start Guide Rev. 1.0
"iBeacon" which is based on Bluetooth Low Energy.
"SPP" which is based on Bluetooth Classic.
Energy)",
4 Setting up the Demo
 4.4 Setting up
 4.5 Setting up "SPP (Bluetooth
Page 11 of 20