Windows 2000 Printer Setup - Brother NC-6100h Network User's Manual

3
Select DLC Protocol and then OK or Add if using Windows
2000. You may be asked for the location of the files. For Intel
based computers, the necessary files are stored in the i386
directory of the Windows NT
Intel platform, specify the correct directory on your Windows
®
NT 4.0 CD-ROM and close the window.
4
Reboot your system to make the change take effect. Windows
2000 should not require a re-boot.
®
Windows
1
Log into Windows
the Start menu, select Settings and then Printers.
2
Select Add Printer (If you have already installed a Brother
printer driver, double click the printer driver that you wish to
configure and then select Printers/Properties, select the Ports
tab, click on Add Port and continue from Step 6 (ignoring
steps 11-14 about installing the correct driver)).
3
Click Next.
4
Select Local Printer and make sure that Automatically detect
and install my Plug and Play printer is not checked.
5
Click Next.
6
Select the Create a new port: option and highlight Hewlett-
Packard Network Port.
7
Click Next.
8
A list of available print server MAC addresses (Ethernet
addresses) appears in the larger box under Card Address.
Select the address of the desired print server (you can see the
Ethernet address on the printer settings page).
You can find the node name and MAC address by printing
out the printer settings page. Refer to the Quick Setup Guide
for information on how to print the settings page on your print
server.
8 - 2 DLC PRINTING
2000 Printer Setup
®
2000 with administrative privileges. From
®
4.0 CD-ROM. If you have a non-
®
®