Brother Internet Print: Installing The Bip Software On; Windows ® 95/98/Me/2000/Xp And Windows Nt; Setup From Cd-Rom - Brother NC-6100h Network User's Manual

Brother Internet Print: Installing the BIP Software
on Windows
®
NT 4.0
To install the BIP software on a Windows
®
Windows NT
Be sure that the PC is running an E-mail program (for
example, Microsoft Outlook) that is capable of sending
E-mail message using Winsock.
Be sure that your E-mail server is capable of sending
messages across the Internet.

Setup from CD-ROM

1
Start the CD-ROM installation menu program according to the
Quick Setup Guide.
2
Select the proper model and Software Installation menu. Then
select the Network Print Software menu to start the Brother
Network Print Software installation program.
3
Click the Next button in response to the Welcome message.
4
Select the Brother Internet Print button.
5
Select the desired directory to install the BIP files and then click
Next. The installation program will create the directory for you if
it does not already exist.
6
You will then be asked for a port name. Enter the name of the
port. The port name must begin with the BIP and end with a
number, for example, BIP1.
7
You will then see a message about Partial E-mail Print. Partial
E-mail Print is the ability of the Brother Internet Print software to
break down E-mail Print jobs into smaller sections to prevent a
mail file size limitation problem for the mail server.
8
Click OK to continue.
5 - 7 CONFIGURING INTERNET PRINTING FOR WINDOWS
®
95/98/Me/2000/XP and Windows
4.0 PC, execute the following steps:
®
95/98/2000/XP and
®