Other Systems - Brother NC-6100h Network User's Manual

OS/400 version 4, 5, 5.1
You can also use the following command line to create a printer
definition:
CRTDEVPRT DEVD(BR2) DEVCLS(*LAN) TYPE(3812)
MODEL(1) LANATTACH(*IP) PORT(9100) FONT(011)
PARITY(*NONE) STOPBITS(1) TRANSFORM(*YES)
MFRTYPMDL(*HP5SI) PPRSRC1(*A4) PPRSRC2(*A4)
RMTLOCNAME('10.0.0.200') SYSDRVPGM(*HPPJLDRV)
TEXT('Arnes Printer')

Other Systems

Other systems use similar programs to set up print servers. These
programs will generally ask for the following information:
Requested information:
remote printer
remote host computer name
remote host IP address
Technical support specialists for these companies can usually
answer configuration questions if you provide them with the
equivalent UNIX configuration information (tell them that the print
server looks like a remote UNIX host computer running the lpd line
printer daemon).
If you have not created a spool directory for the Brother print server
on your UNIX host computer, you will need to do so now (the printer
setup utilities in HP-UX, AIX, Solaris 2.xx, and other systems will
automatically create the spool directory). The lpd spool directory is
usually located in the /usr/spool directory (check with your
system manager to see if the location is different for your system). To
create a new spool directory, use the mkdir command. For
example, to create a spool directory for the queue laser1, you would
enter:
mkdir /usr/spool/lpd/laser1
1 - 13 UNIX PRINTING
You should use:
Binary or Text service name
Any name (must match the
name in the printcap file, if any)
or in some cases, you may enter
the print server IP address here
IP address of print server.