4. Insert the supplied disk (Printer/PC Card Driver disk1) into your
floppy disk drive A (or drive B).
5. Choose Run from the File menu in the Program Manager.
6. Type A:\CARDINST (or B:\CARDINST for drive B) in the Command
Line box.
7. Choose the OK button or press the Enter key.
8. Follow the installation instructions that appear on the display monitor.
9. When the installation is complete, remove the disk from your floppy
disk drive.
10. Restart your computer.
11. Turn off your computer.
Note
The 'Config.sys' file and 'Autoexec.bat' file in your system have been
changed. The originals are saved as 'Config.up1' and 'Autoexec.up1'.
5