Installation - Brother MP-21 Quick Setup Manual

D: INSTALLING THE INK CARTRIDGES

Installation

How to install the ink cartridges
!
Caution
When you connect the printer through the Printer Interface Card, make
sure that the PC Card Cable is connected securely and your PC is on.
1. Turn the Printer Stand at the bottom of the printer outwards so that the
printer will be stable.
2. Make sure that the LEDs are on. If the LEDs are off, press the
(On/Off) button to turn the printer on. Open the top cover.
Warning
DO NOT push the shutter with your fingers.
Sharp pins are in the Ink Cartridge Slot. If you touch them, it might
cause injury.
Note
If the LEDs do not come on, even after you pressed the
button, go back to 'A' and 'B' and repeat these operations again.
3. Open an ink cartridge bag and take the cartridge out of the bag.
Fig. 11 Open the Top Cover
10
(On/Off)