Chapter 3 Control Panel; Lamps; Ready Lamp - Brother HL-630 User Manual

CHAPTER 3
CONTROL PANEL

LAMPS

This section refers to the following lamps on the printer control panel.
Note
When the power cord is not plugged into the AC outlet or the printer is in
sleep mode, all lamps including the READY lamp are off.

READY Lamp

The green READY lamp indicates the current status of the printer.
The printer will wake up automatically from sleep mode data is received
or a switch is pressed when the power cord is plugged in.
Lamp
Blinking
Blinking
Fig. 3-1 Lamps on Control Panel
Printer status
Off The power cord is not plugged into the AC outlet.
The printer is in the sleep mode.
The printer is warming up.
(Blinking at 0.5 seconds)
The printer is off-line.
(Blinking at 1 seconds)
On The printer is on-line.

CHAPTER 3 CONTROL PANEL

3–1