Brother HL-630 User Manual page 21

Loading Paper into the Feeder
To load paper into the feeder, follow these steps.
1. Open the multi-purpose sheet feeder. (
2. Load paper into the multi-purpose sheet feeder with the printing
surface face down. (
Caution
The feeder can hold up to 200 sheets of plain paper. If you load too
many sheets, paper jams could occur.
Make sure that the paper is stacked below the
If there is still some paper in the feeder, you must first remove it, put
it together with the new paper and then insert the stack in the feeder.
Fig. 2-4 Opening the Feeder and
Loading Paper or Envelope in the Feeder
Note
If you load envelopes in the feeder, make sure they are inserted in the
direction shown above.
)
)
CHAPTER 2 PAPER HANDLING
mark.
2–5