Brother HL-5270DN User Manual page 73

NETWORK for HL-5280DW users (Continued)
Submenu 1 Submenu 2
WLAN WIRELESS
(Continued) (Continued)
NETBIOS/IP
SET
DEFAULT
Restores all network settings of the internal print server to default.
FACTORY
RESET
The default settings are shown in Bold with an asterisk.
1
Automatic Private IP Addressing (APIPA) protocol automatically configures an IP address and subnet mask. For more details, see the Network
User's Guide on the CD-ROM.
Menu Selections Options
AD-HOC*/INFRASTRUCTURE Shows the current
COMM.MODE
(Shows a list of available names for the wireless network)
LIST SSID
(Shows SSID [uses a maximum of 32 digits and characters 0-9,
SSID
a-z and A-Z in ASCII values])
CHANNEL 1........11*..14
AUTHENTICATION
OPEN SYSTEM*/SHARED
KEY/WPA-PSK/LEAP
ENCRYPTION NONE*/WEP/TKIP/AES/CK
IP
WEP KEY SELECT KEY1*/KEY2/KEY3/KEY4
WEP KEY1 SIZE 128(104)BITS*/64(40)B
ITS
WEP KEY1 TYPE ASCII*/HEX
(Shows the WEP key [uses a maximum of 5 or 13 digits and
WEP KEY1
characters 0-9, a-z and A-Z in ASCII values, or uses a maximum
of 10 or 26 digits and characters 0-9 and A-F in HEX values])
WEP KEY2 SIZE
WEP KEY2 TYPE
WEP KEY2
WEP KEY3 SIZE
WEP KEY3 TYPE
WEP KEY3
WEP KEY4 SIZE
WEP KEY4 TYPE
WEP KEY4
PASSPHRASE
USER
PASSWORD
APPLY YES*/YES&REPORT
ON*/OFF
Restores wireless network settings of the internal print server to default.
4. Control Panel
Descriptions
Communication Mode.
Chooses the channel you use.
Chooses the authentication
methods.
Chooses the encryption
methods.
Chooses the WEP key you use.
Sets the size of WEP key1.
Chooses the input type of WEP
key1.
Applys the wireless settings.
65