Encryption Methods - Brother HL-4040CN Network User's Manual
Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs
Also See for HL-4040CN:
- Service manual (341 pages) ,
- User manual (202 pages) ,
- Network user's manual (87 pages)
Table of Contents
Advertisement
WPA-PSK/WPA2-PSK
®
Enables a Wi-Fi
Protected Access Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother
wireless printer to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK (WPA-Personal).
LEAP
®
Cisco
LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. which
uses user ID and password for authentication.
Encryption methods
Encryption is used to secure the data that is sent over the wireless network. The Brother printer supports the
following encryption methods:
None
No encryption method is used.
WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity check and
rekeying mechanism.
AES
AES (Advanced Encryption Standard) is Wi-Fi
CKIP
The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.
Configuring your printer for a wireless network (For HL-4070CDW)
®
authorized strong encryption standard.
3
3
21
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
