Two-Sided Printing (Manual Duplex); Loading Envelopes In Multi-Purpose Sheet Feeder - Brother DCP-1000 Owner's Manual

Two-Sided Printing (Manual Duplex)

The supplied printer drivers for Windows
Workstation Version 4.0 support manual duplex printing. (For more
information, see the Help screen for the printer driver.)
Please select LPT1 port in the printer driver. The machine prints all the
even-numbered pages on one side of the paper first. Then, the Windows
instructs you (with a pop-up message) to reinsert the paper. Before reinserting
the paper, straighten it well or you may get a paper jam. Very thin or very thick
paper is not recommended. If the paper "double-feeds" (sends two sheets at
once), hold the stack of paper except for the front sheet while the paper is
feeding.
When you use manual duplexing, it is possible that a paper jam may occur or the
printer quality might not be satisfactory.

Loading Envelopes in Multi-purpose Sheet Feeder

You can load up to 10 envelopes into the multi-purpose sheet feeder. Press and
hold the blue lever on the right as you load the envelopes and slide the paper
guides to fit. Make sure envelopes are inserted in the direction shown below.
®
95/98/98SE, Windows NT
Load the envelopes and adjust
the guide with the lever down
U S I N G B R O T H E R D C P A S A P R I N T E R
®
®
driver
Multi-purpose
Sheet Feeder
6 - 2