Special Servicing Tools - Stihl BT 45 Manual

10.

Special Servicing Tools

No. Description
1 Locking strip
2 Socket
3 Socket T 45
4 Carburetor and crankcase tester
5 Nipple
6 Hose for leakage test
7 T-handle screwdriver
Q-SW 8 x 200
8 Crimping tool
9 Torque wrench
10 Torque wrench
11 Socket T 27 x 125
12 T-handle screwdriver
Q - T 27 x 150
13 Installing tool
14 Press arbor
15 Hook
16 Hook
17 Pliers, DIN 5256-C19
Remarks:
1) Always use torque wrench to tighten DG or P screws.
2) Alternative: Torque wrench 5910 890 0302 with optical/acoustic signal.
3) Alternative: Torque wrench 5910 890 0312 with optical/acoustic signal.
4) Only use for releasing/removing DG or P screws.
40
Part No. Application
0000 893 5903 Blocking the crankshaft
0812 540 1112 Fitting/removing spline socket head
cap screws with electric or pneumatic
screwdriver, releasing clutch drum
5910 890 0105 Releasing/securing chuck
1106 850 2905 Testing crankcase and carburetor for
leaks
0000 855 9200 Carburetor leakage test
1110 141 8600 Carburetor leakage test
5910 890 2420 Carburetor nuts
5910 890 8210 Attaching cable connectors, lugs, etc.
5910 890 0301 0.5 to 18 Nm
5910 890 0311 6 to 80 Nm
0812 524 2104 Fitting/removing spline socket head
cap screws with electric or pneumatic
screwdriver, tightening to prescribed
torque with torque wrench
5910 890 2400 All IS screws
5910 890 2204 Installing and flaring the starter rope
guide bush
1118 893 7200 Removing and installing ball bearings
5910 893 8800 Removing pickup body
5910 890 2800 Detaching springs from clutch shoes
0811 641 8380 Removing and installing internal
circlips/retaining rings
Rem.
1) 2)
1) 3)
4)
BT 45