Brother MFC-P2000 Quick Setup Manual page 28

Laser printer / scanner / copier
Hide thumbs Also See for MFC-P2000:
Table of Contents

Advertisement

High Temperature
2
3
4
Warning
After you have just used the machine,
some internal parts of the machine are
extremely hot. When you open the top
cover, never touch the shaded parts
shown in the illustration.
Gently turn the lever on the toner cartridge
forward until it stops.
Note
The toner cartridge cannot be removed
unless the shutter is completely closed by
turning the lever fully to the front.
Remove the old toner cartridge from the
drum unit by pulling it out gently.
!
Caution
Handle the toner cartridge carefully. If toner
scatters on your hands or clothes, wipe or
wash it off with cold water immediately.
Unpack the new toner cartridge, gently
shake it five or six times and then remove
the protective part.
!
Caution

Only unpack the toner cartridge
immediately before installing it into the
machine. If toner cartridges are left
unpacked for a long period of time, the
toner life is shortened.
 You can only use a Brother genuine
toner cartridge (TN-300 series) which is
specially formulated to ensure top print
quality. Damage caused by using toner
cartridges other than Brother original is
not covered under any warranty or
service agreement.
- 26 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-p2000

Table of Contents