Using The Control Panel To Configure Your Machine For A Network; Using Other Methods To Configure Your Machine For A Network - Brother MFC-J615W User Manual

Configuring your machine for a network with an Ethernet cable connection (DCP-J715W, MFC-J615W and MFC-J630W only)
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
Macintosh
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.

Using the control panel to configure your machine for a network

You can configure your machine for a network using the control panel Network menu. (See Control panel
setup on page 65.)

Using other methods to configure your machine for a network

You can configure your machine for a network using other methods. (See Other ways to set the IP address
(for advanced users and administrators) on page 100.)
2
2
2
14