Brother MFC-9760 Quick Setup Manual page 3

Step 4.
Connect the MFC to your PC with Parallel Cable.
A.
Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips.
B.
Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your
computer's parallel printer port, see the User's Guide for your computer.
Step 5.
Turn the MFC power switch ON.
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
( For Windows ® 95/98/98SE/Me Users )
1.
In the Connect Cable window,
click Next.
3.
Click Yes to have the Control
Centre loaded each time
Windows ® is started.
The Control Centre will appear
as an icon in the task tray.
Please see Note *3.
Step 4.
Turn the MFC power switch ON.
Step 5.
Connect the Filter Core and Cable Tie to the USB cable,
and then connect the MFC to your PC with the USB cable.
(It will take a few seconds for the installation screen to appear.)
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
( For Windows
1.
In the Add Printer Wizard
window, select BRUSB:
USB Printer Port, and then
click Next.
4.
If the test page is printed
correctly, click Yes.
If you click No, follow the
prompts on the screen to
correct the problem.
2.
When the above screen
appears, click Finish and wait
as the PC restarts Windows ®
and continues the installation.
Printer and Scanner drivers have been installed and the
installation is now complete.
®
98/98SE/Me Users )
2.
Accept the default Printer
name by selecting Yes, and
then click Next.
5.
Select Yes to restart your
computer, and then click
Finish.
Printer and Scanner drivers have been installed and the
installation is now complete.
– 3 –
®
( For Windows 2000 Professional User )
1.
In the Connect Cable window,
click Next.
3.
When the Digital Signature
Not Found dialog boxes
appear, click Yes to install the
driver.
3.
Select Yes (recommended),
and then click Finish. A test
page will be printed so you
can check the print quality.
6.
Click Yes to have the Control
Centre loaded each time
Windows ® is started.
The Control Centre will
appear as an icon in the task
tray. Please see Note *3.
2.
When the above screen
appears, Click Finish and wait
as the PC restarts Windows ®
and continues the installation.
4.
Click Yes to have the Control
Centre loaded each time
Windows ® is started.
The Control Centre will appear
as an icon in the task tray.
Please see Note *3.
Printer and Scanner drivers have been installed and the
installation is now complete.
( For Windows ® 2000 Users )
1.
When the Digital Signature Not
Found dialog boxes appear, click
Yes to install the driver.
2.
Select Finish to restart your
computer.
3.
Click Yes to have the Control
Centre loaded each time
Windows ® is started. The Control
Centre will appear as an icon in
the task tray. Please see Note *3.
Printer and Scanner drivers have been installed and the
installation is now complete.